[Dec 2020] Cisco 200-301 exam dumps and online practice questions are available from Leads4Pass

The latest updated Cisco 200-301 exam dumps and free 200-301 exam practice questions and answers! Latest updates from leads4pass Cisco 200-301 Dump PDF and 200-301 Dump VCE, leads4pass 200-301 exam questions updated and answers corrected! Get the full Cisco 200-301 dumps from leads4pass 200-301 (VCE&PDF)

Latest 200-301 PDF for free

Share the Cisco 200-301 Dumps PDF for free From leads4pass 200-301 Dumps part of the distraction collected on Google Drive shared by leads4pass
https://drive.google.com/file/d/1FXyIHQQjzFmqcZS741tYexuT3qAVU_Gt/

Latest leads4pass 200-301 Youtube

Share the latest Cisco 200-301 exam practice questions and answers for free from Led4Pass Dumps viewed online by Youtube Videos

The latest updated Cisco 200-301 Exam Practice Questions and Answers Online Practice Test is free to share from leads4pass (Q1-Q13)

QUESTION 1

Refer to the exhibit. With which metric was the route to host 172.16.0.202 learned?
A. 0
B. 110
C. 38443
D. 3184439
Correct Answer: C

QUESTION 2
Drag and drop the network protocols from the left onto the correct transport services on the right.
Select and Place:

QUESTION 3
Refer to the exhibit. What commands are needed to add a subinterface to Ethernet0/0 on R1 to allow for VLAN 20, with
IP address 10.20.20.1/24?

A. R1(config)#interface ethernet0/0 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1
255.255.255.0
B. R1(config)#interface ethernet0/0.20 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1
255.255.255.0
C. R1(config)#interface ethernet0/0.20 R1(config)#ip address 10.20.20.1 255.255.255.0
D. R1(config)#interface ethernet0/0 R1(config)#ip address 10.20.20.1 255.255.255.0
Correct Answer: B

QUESTION 4
DRAG DROP
Drag and drop the characteristics of networking from the left onto the correct networking types on the right.
Select and Place:

Correct Answer:

QUESTION 5
Refer to the exhibit. If the network environment is operating normally, which type of device must be connected to
interface FastEthernet 0/1?

A. DHCP client
B. access point
C. router
D. PC
Correct Answer: D

QUESTION 6
Refer to the exhibit

A network engineer must block access for all computers on VLAN 20 to the web server via HTTP All other computers
must be able to access the web server.

Which configuration when applied to switch A accomplishes this task?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B

QUESTION 7
How can the Cisco Discovery Protocol be used?
A. to allow a switch to discover the devices that are connected to its ports
B. to determine the hardware platform of the device
C. to determine the IP addresses of connected Cisco devices
D. all of the above
Correct Answer: D

QUESTION 8
Which IPv6 address block sends packets to a group address rather than a single address?
A. 2000::/3
B. FC00::/7
C. FE80::/10
D. FF00::/8
Correct Answer: D

QUESTION 9
Refer to the exhibit.

An extended ACL has been configured and applied to router R2. The configuration failed to work as intended.
Which two changes stop outbound traffic on TCP ports 25 and 80 to 10.0.20.0/26 from the 10.0.10.0/26 subnet while
still allowing all other traffic? (Choose two.)
A. Add a “permit ip any any” statement at the end of ACL 101 for allowed traffic.
B. Add a “permit ip any any” statement to the beginning of ACL 101 for allowed traffic.
C. The ACL must be moved to the Gi0/1 interface outbound on R2.
D. The source and destination IPs must be swapped in ACL 101.
E. The ACL must be configured the Gi0/2 interface inbound on R1.
Correct Answer: BD

QUESTION 10
A device detects two stations transmitting frames at the same time. This condition occurs after the first 64 bytes of the frame is received interface counter increments?
A. collision
B. CRC
C. runt
D. late collision
Correct Answer: D

QUESTION 11
What is the difference regarding reliability and communication type between TCP and UDP?
A. TCP is reliable and is a connectionless protocol; UDP is not reliable and is a connection-oriented protocol.
B. TCP is not reliable and is a connectionless protocol; UDP is reliable and is a connection-oriented protocol.
C. TCP is not reliable and is a connection-oriented protocol; UDP is reliable and is a connectionless protocol.
D. TCP is reliable and is a connection-oriented protocol; UDP is not reliable and is a connectionless protocol.
Correct Answer: D

QUESTION 12
Which network allows devices to communicate without the need to access the Internet?
A. 172.9.0.0/16
B. 172.28.0.0/16
C. 192.0.0.0/8
D. 209.165.201.0/24
Correct Answer: B

QUESTION 13
While examining excessive traffic on the network, it is noted that all incoming packets on an interface appear to be
allowed even though an IPv4 ACL is applied to the interface. Which two misconfigurations cause this behavior?
(Choose two.)
A. The ACL is empty
B. A matching permit statement is too broadly defined
C. The packets fail to match any permit statement
D. A matching deny statement is too high in the access list
E. A matching permit statement is too high in the access list
Correct Answer: BE

Fulldumps shares the latest updated Cisco 200-301 exam exercise questions, 200-301 dumps pdf, and Youtube video learning for free.
All exam questions and answers come from the leads4pass exam dump shared part! leads4pass updates throughout the year and shares a portion of your exam questions for free to help you understand the exam content and enhance your exam experience!
Get the full Cisco 200-301 exam readiness dump questions at https://www.leads4pass.com/200-301.html (pdf&vce)

ps.
Get free Cisco 200-301 dumps PDF online: https://drive.google.com/file/d/1FXyIHQQjzFmqcZS741tYexuT3qAVU_Gt/