[Dec 2020] Cisco 300-410 exam dumps and online practice questions are available from Lead4Pass

The latest updated Cisco 300-410 exam dumps and free 300-410 exam practice questions and answers! Latest updates from leads4pass Cisco 300-410 Dump PDF and 300-410 Dump VCE, leads4pass 300-410 exam questions updated and answers corrected! Get the full Cisco 300-410 dumps from https://www.leads4pass.com/300-410.html (VCE&PDF)

Latest 300-410 PDF for free

Share the Cisco 300-410 Dumps PDF for free From leads4pass 300-410 Dumps part of the distraction collected on Google Drive shared by leads4pass
https://drive.google.com/file/d/1edI9J8KRuqSiTl0BXD0FcEbZ_bSJLnRz/

Latest leads4pass 300-410 Youtube

Share the latest Cisco 300-410 exam practice questions and answers for free from Led4Pass Dumps viewed online by Youtube Videos

The latest updated Cisco 300-410 Exam Practice Questions and Answers Online Practice Test is free to share from leads4pass (Q1-Q13)

QUESTION 1
Refer to the exhibit. An engineer configures a static route on a router, but when the engineer checks the route to the
destination, a different next-hop is chosen. What is the reason for this?

A. Dynamic routing protocols always have priority over static routes.
B. The metric of the OSPF route is lower than the metric of the static route.
C. The configured AD for the static route is higher than the AD of OSPF.
D. The syntax of the static route is not valid, so the route is not considered.
Correct Answer: C

QUESTION 2
Refer to the exhibit. An engineer is trying to generate a summary route in OSPF for network 10.0.0.0/8, but the
summary route does not show up in the routing table. Why is the summary route missing?

A. The summary-address command is used only for summarizing prefixes between areas.
B. The summary route is visible only in the OSPF database, not in the routing table.
C. There is no route for a subnet inside 10.0.0.0/8, so the summary route is not generated.
D. The summary route is not visible on this router, but it is visible on other OSPF routers in the same area.
Correct Answer: C

QUESTION 3
Refer to the exhibit. After applying IPsec, the engineer observed that the DMVPN tunnel went down, and both spoke-to spoke and hub was not establishing. Which two actions resolve the issue? (Choose two.)

A. Change the mode from mode tunnel to mode transport on R3.
B. Remove the crypto isakmp key cisco address 10.1.1.1 on R2 and R3.
C. Configure the crypto isakmp key cisco address 192.1.1.1 on R2 and R3.
D. Configure the crypto isakmp key cisco address 0.0.0.0 on R2 and R3.
E. Change the mode from mode transport to mode tunnel on R2.
Correct Answer: AD

QUESTION 4
Which is a statement about IPv6 inspection is true?
A. It teams and secures bindings for stateless autoconfiguration addresses in Layer 3 neighbor tables
B. It learns and secures bindings for stateful autoconfiguration addresses in Layer 3 neighbor tables
C. It teams and secures bindings for stateful autoconfiguration addresses in Layer 2 neighbor tables
D. It team and secures binding for stateless autoconfiguration addresses in Layer 2 neighbor tables.
Correct Answer: D

QUESTION 5
Which two protocols can cause TCP starvation? (Choose two)
A. TFTP
B. SNMP
C. SMTP
D. HTTPS
E. FTP
Correct Answer: AB

QUESTION 6
Which transport layer protocol is used to form LDP sessions?
A. UDP
B. SCTP
C. TCP
D. RDP
Correct Answer: C

QUESTION 7
During the maintenance window, an administrator accidentally deleted the Telnet-related configuration that permits a
Telnet connection from the inside network (Eth0/0) to the outside of the networking between Friday?Sunday night hours
only.

Which configuration resolves the issue?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B

QUESTION 8
Refer to the exhibit. An engineer is trying to configure local authentication on the console line, but the device is trying to
authenticate using TACACS+. Which action produces the desired configuration?

A. Add the aaa authentication login default none command to the global configuration.
B. Replace the capital “C” with a lowercase “c” in the aaa authentication login Console local command.
C. Add the aaa authentication login default group tacacs+ local-case command to the global configuration.
D. Add the login authentication Console command to the line configuration
Correct Answer: D

QUESTION 9
Drag and drop the operations from the left onto the locations where the operations are performed on the right. Drag
each definition on the left to the matching term on the right.
Select and Place:

QUESTION 10
Which attribute eliminates LFAs that belong to protected paths in situations where links in a network are connected
through a common fiber?
A. shared risk link group-disjoint
B. linecard-disjoint
C. lowest-repair-path-metric
D. interface-disjoint
Correct Answer: B
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_eigrp/configuration/xe-3s/asr1000/ire-xe-3sasr1000/ire-ipfrr.html

QUESTION 11
Refer to the exhibit.

A junior engineer updated a branch router configuration. Immediately after the change, the engineer receives calls from
the help desk that branch personnel cannot reach any network destinations. Which configuration restores service and
continues to block 10.1.1.100/32?
A. route-map FILTER-IN deny 5
B. ip prefix-list 102 seq 15 permit 0.0.0.0/32 le 32
C. ip prefix-list 102 seq 5 permit 0.0.0.0/32 le 32
D. route-map FILTER-IN permit 20
Correct Answer: D

QUESTION 12
Which method changes the forwarding decision that a router makes without first changing the routing table or
influencing the IP data plane?
A. nonbroadcast multiaccess
B. packet switching
C. policy-based routing
D. forwarding information base
Correct Answer: C

QUESTION 13
A network engineer is configuring a DHCP server to support a specialized application. Which additional DHCP feature
must be enabled to support the delivery of various additional parameters to DHCP clients?
A. modules
B. vendor extensions
C. options
D. Scopes
Correct Answer: C

Fulldumps shares the latest updated Cisco 300-410 exam exercise questions, 300-410 dumps pdf, and Youtube video learning for free.
All exam questions and answers come from the leads4pass exam dump shared part! leads4pass updates throughout the year and shares a portion of your exam questions for free to help you understand the exam content and enhance your exam experience!
Get the full Cisco 300-410 exam readiness dump questions at https://www.leads4pass.com/300-410.html (pdf&vce)

ps.
Get free Cisco 300-410 dumps PDF online: https://drive.google.com/file/d/1edI9J8KRuqSiTl0BXD0FcEbZ_bSJLnRz/