[Jan 2021] Cisco 300-535 exam dumps and online practice questions are available from Lead4Pass

The latest updated Cisco 300-535 exam dumps and free 300-535 exam practice questions and answers! Latest updates from leads4pass Cisco 300-535 Dump PDF and 300-535 Dump VCE, leads4pass 300-535 exam questions updated and answers corrected!
Get the full Cisco 300-535 dumps from https://www.leads4pass.com/300-535.html (VCE&PDF)

Latest 300-535 PDF for free

Share the Cisco 300-535 Dumps PDF for free From leads4pass 300-535 Dumps part of the distraction collected on Google Drive shared by leads4pass
https://drive.google.com/file/d/1gfWAmCIWYcK4OlAXkiBVOjbyfVsP2kaJ/

Latest leads4pass 300-535 Youtube

Share the latest Cisco 300-535 exam practice questions and answers for free from Led4Pass Dumps viewed online by Youtube Videos

The latest updated Cisco 300-535 Exam Practice Questions and Answers Online Practice Test is free to share from leads4pass (Q1-Q13)

QUESTION 1
Which statement describes an asynchronous API communication?
A. Asynchronous communication waits for a response.
B. Synchronous communication is with a central orchestrator.
C. It is not necessary to wait for the availability of a resource.
D. An application can freeze if there is no response from a request.
Correct Answer: C

QUESTION 2

Refer to the exhibit. Regarding the Python script using YDK, what is the result for a device that is running Cisco IOS XR
Software?
A. retrieves the system time
B. configures the system time
C. prints the uptime of the CRUDService
D. prints the system uptime
Correct Answer: D

QUESTION 3
The Netmiko BaseConnection class contains a method called “send_config_set()”. Which two actions does this method
perform on the device? (Choose two.)
A. It takes a filename parameter that executes commands contained in that file on the device.
B. It requires the user to explicitly send configure terminal and exit commands to the device to enter and exit
configuration mode.
C. It automatically enters and exits the configuration mode on the device.
D. It takes a Python iterable, such as a list of commands, and executes them in order on the device.
E. It saves the running configuration to the startup configuration after executing the configuration commands on the
device.
Correct Answer: CD

QUESTION 4
An engineer wants to replace the BLOCK_BAD ACL on the Cisco IOS XE router with this new content. The engineer
wants to use RESTCONF for this and constructs a PUT request to the resource/restconf/data/native/ip/access-list/
Cisco-IOS-XE-ACL:extended=BLOCK_BAD. What must the body look like to achieve the Cisco IOS XE configuration?
Desired configuration:
IP access-list extended BLOCK_BAD permit IP any host 192.168.20.1 deny IP any any

A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D

QUESTION 5
After a configuration request is sent using NETCONF, which call releases any locks and resources associated with the
session?
A.
B.
C.
D.
Correct Answer: C
Reference: https://tools.ietf.org/html/rfc6241

QUESTION 6

Refer to the exhibit. An engineer implements automation with Cisco XTC. Which problem results in the 404 Not
Found error code on the REST call?
A. The resource that you are trying to delete does not exist.
B. Port 8080 is not enabled on XTC.
C. XTC does not offer any APIs.
D. You must change the request method.
Correct Answer: B

QUESTION 7

Refer to the exhibit. When YDK is used to interact with Cisco routers, what is the purpose of passing intf_f into the
crud_service.read() method?
A. The Interfaces() class acts as a NETCONF filter, which limits the data returned to that of the openconfig: interfaces
YANG model.
B. It provides the data types of the openconfig: interfaces model to the router for dynamic configuration of the interfaces.
C. It locks the interfaces from modification by other active NETCONF sessions.
D. It passes default values into the crud_service, which reconfigures all interfaces to their default configurations.
Correct Answer: D

QUESTION 8
Which Git command is needed to stage the file network-deploy.py to then commit the changes to the revision history?
A. git init network-deploy.py
B. git add network-deploy.py
C. git merge network-deploy.py
D. git commit network-deploy.py
Correct Answer: B

QUESTION 9
You create a simple service package skeleton in Cisco NSO using ncs-make-package? service-skeleton template VLAN.
Which two steps must be performed to complete the service? (Choose two.)
A. Create the VLAN service template in XML.
B. Modify the VLAN FastMap algorithm.
C. Start the VLAN Python VM.
D. Create the VLAN service model in YANG.
E. Compile the VLAN NED.
Correct Answer: DE

QUESTION 10
Which command configures the remote peer when the Cisco IOS XR Traffic Controller is used?
A. peer-sync ipv4 192.168.0.3
B. state ipv4 192.168.0.3
C. peer ipv4 192.168.0.3
D. state-sync ipv4 192.168.0.3
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-2/segmentrouting/configuration/guide/b-segment-routing-cg-asr9000-62x/b-seg-routing-cg-asr9000-62x_chapter_01001.html

QUESTION 11
Which two commands generate a template using Cisco NSO to build a service package? (Choose two.)
A. show running-config devices device ce-ios config ios: interface Loopback 0 | display template.xml
B. show running-config devices device ce-ios config ios: interface Loopback 0 | display XML | save template.xml
C. request running-config devices device ce-ios config ios:interface Loopback 0 | display XML
D. show running-config devices device ce-ios config ios: interface Loopback 0
E. show running-config devices device ce-ios config ios: interface Loopback 0 | display XML
Correct Answer: AC

QUESTION 12

Refer to the exhibit. The ncclient Python script is captured from the ncclient import manager. Which configuration on the
Cisco IOS XE device is the script used to enable?
A. router ospf 100 router-id 1.1.1.1 network 10.1.1.0 0.0.0.3 area 0
B. router ospf 100 network 10.1.1.0 0.0.0.3 area 0
C. router ospf 100 router-id 10.1.1.0 network 1.1.1.1 0.0.0.3 area 0
D. router OSPF 100 router-id 1.1.1.1
Correct Answer: A

QUESTION 13
Which two operations must be used to allow a network engineer to use NETCONF to configure and manage networking
devices? (Choose two.)
A.
B.
C.
D.
E.
Correct Answer: AC

Fulldumps shares the latest updated Cisco 300-535 exam exercise questions, 300-535 dumps pdf, and Youtube video learning for free.
All exam questions and answers come from the leads4pass exam dump shared part! leads4pass updates throughout the year and shares a portion of your exam questions for free to help you understand the exam content and enhance your exam experience!
Get the full Cisco 300-535 exam readiness dump questions at https://www.leads4pass.com/300-535.html (pdf&vce)

ps.
Get free Cisco 300-535 dumps PDF online: https://drive.google.com/file/d/1gfWAmCIWYcK4OlAXkiBVOjbyfVsP2kaJ/