The latest updated Cisco 300-615 exam dumps and free 300-615 exam practice questions and answers! Latest updates from leads4pass Cisco 300-615 Dump PDF and 300-615 Dump VCE, leads4pass 300-615 exam questions updated and answers corrected!
Get the full Cisco 300-615 dumps from https://www.leads4pass.com/300-615.html (VCE&PDF)
Latest 300-615 PDF for free
Share the Cisco 300-615 Dumps PDF for free From leads4pass 300-615 Dumps part of the distraction collected on Google Drive shared by leads4pass
https://drive.google.com/file/d/1VDjIxQaTG850PNBFMyTv7rMu4Tontciq/
Latest leads4pass 300-615 Youtube
Share the latest Cisco 300-615 exam practice questions and answers for free from Led4Pass Dumps viewed online by Youtube Videos
The latest updated Cisco 300-615 Exam Practice Questions and Answers Online Practice Test is free to share from leads4pass (Q1-Q13)
QUESTION 1
Refer to the exhibit. Interface fc1/5 is offline. Which action should be taken to troubleshoot the issue?
A. Activate the correct zoneset for VSAN 100.
B. Update the FLOGI database to contain the FLOGI entries for interface fc1/5 in VSAN 100.
C. Update the FCNs database to contain names for VSAN 100.
D. Configure the upstream ports and the server ports to be in VSAN 100.
Correct Answer: D
Â
QUESTION 2
A server administrator attempts to change the Cisco IMC KVM certificate to one signed by a private CA, but the
certificate is not being accepted. What can cause this process to fail?
A. using a certificate with a password-protected private key
B. RSA encryption being used in the generation of the certificate.
C. AES encryption being used in the generation of the certificate.
D. public IP addres of the Cisco IMC not being included in the SAN.
Correct Answer: A
Â
QUESTION 3
Refer to the exhibit.
Boot from SAN fails. The host fails to detect the LUNs. You must resolve the issue. Drag and drop the WWPNs on the
left to the correct zones on the right.
Select and Place:
Â
QUESTION 4
Refer to the exhibit. HSRP adjacency fails to form between Nexus7K-1 and Nexus7K-2. Which action should be taken to
solve the problem?
A. Configure preempts on one of the switches in the HSRP group.
B. Configure the same HSRP priority between the two switches.
C. Configure the correct subnet mask on Nexus7K-1.
D. Configure HSRP version 2 on Nexus7K-2.
Correct Answer: D
Â
QUESTION 5
After upgrading a client\\’s fabric interconnect to the latest version, an engineer discovers that the appliance has lost its
entire configuration. Which two locations should an engineer check to confirm that the appliance had backed up the
configuration prior to the upgrade in order to retrieve the lost configuration? (Choose two.)
A. Equipment FSM page, InternalBackup stage
B. Service profiles page, InternalBackup stage
C. Admin page, PollInternalBackup stage
D. Equipment FSM page, PollInternalBackup stage
E. Admin page, InternalBackup stage.
Correct Answer: AC
Â
QUESTION 6
Refer to the exhibit. An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is
true?
A. The interface is working correctly and fully operational, but it is not in use.
B. The interface policy is misconfigured.
C. “out-of-service” is the default interface status in ACI.
D. “out-of-service” indicates that no service graph is in use for this interface.
Correct Answer: B
Â
QUESTION 7
An engineer is troubleshooting a fabric discovery failure. Which two requirements must an engineer verify about switch
connectivity to solve the problem? (Choose two.)
A. A Cisco APIC must be attached to a spine node only.
B. A Cisco APIC must be attached to leaf nodes.
C. Spine nodes must connect to other spine nodes.
D. A Cisco APIC must be dual-attached to two separate spine nodes.
E. Leaf nodes must connect to spine nodes only.
Correct Answer: BE
Â
QUESTION 8
An engineer is troubleshooting a custom AV pair that was created by a client on an external authentication server to
map a read-only role for a specific security domain. Which AV pair solves the problem?
A. shell:domains=Security_Domain_1//Read_Role_1|Read_Role_2
B. shell:domains=Security_Domain_1/Write_Role_1|Read_Role_2
C. shell=Security_Domain_1/Read_Role_1|Read_Role_2
D. shell:domains=Security_Domain_1/Read_Role_1|Read_Role_2
Correct Answer: A
Â
QUESTION 9
An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?
A. Restore UCSM configuration from backup.
B. Roll back to the previous firmware.
C. Use AutoInstall to reinstall the firmware.
D. From the peer IOM, reset the faulty module.
Correct Answer: B
Â
QUESTION 10
You are configuring a Cisco Nexus 9000 Series Switch. Which configuration can be implemented for VXLAN BGP
EVPN?
A. VXLAN BGP EVPN by using an NVE interface in a default VRF
B. RACLs on the Layer 3 uplinks for the VXLAN traffic
C. QoS classification for the VXLAN traffic on all of the interfaces
D. DHCP snooping on the VXLAN VLANs
Correct Answer: B
Â
QUESTION 11
Refer to the exhibit. A switch is being downgraded to an earlier release because of a problem with the current release.
After the switch is downgraded, it can no longer forward traffic. Which action resolves the issue?
A. Enable ISSD after the downgrade is complete.
B. Roll back to the original image.
C. Reload the switch.
D. Shut and no shut the interfaces to the FEX.
Correct Answer: B
Â
QUESTION 12
In Cisco UCS Central you have a certificate that has the status set to Not Yet Valid. Which scenario could cause the
issue?
A. The certificate field is empty.
B. The time is incorrectly synchronized.
C. The trusted point uses a bundled certificate that has a minimum depth of 10.
D. The certificate is issued by a different trusted point.
Correct Answer: B
Â
QUESTION 13
A vPC Type-1 inconsistency between two vPC peers in a VXLAN EVPN setup is discovered. Which two actions need to
be attempted to resolve the issue? (Choose two.)
A. Configure the NVE interfaces to be Upon both switches.
B. Set a different distributed gateway virtual MAC address.
C. Set a different secondary IP address on the NVE source-interface.
D. Configure the same VNI to multicast group mapping.
E. Set a different primary IP address on the NVE source-interface.
Correct Answer: AD
Fulldumps shares the latest updated Cisco 300-615 exam exercise questions, 300-615 dumps pdf, and Youtube video learning for free.
All exam questions and answers come from the leads4pass exam dump shared part! leads4pass updates throughout the year and shares a portion of your exam questions for free to help you understand the exam content and enhance your exam experience!
Get the full Cisco 300-615 exam readiness dump questions at https://www.leads4pass.com/300-615.html (pdf&vce)
ps.
Get free Cisco 300-615 dumps PDF online: https://drive.google.com/file/d/1VDjIxQaTG850PNBFMyTv7rMu4Tontciq/
