[Jan 2021] Cisco 300-710 exam dumps and online practice questions are available from Lead4Pass

The latest updated Cisco 300-710 exam dumps and free 300-710 exam practice questions and answers! Latest updates from leads4pass Cisco 300-710 dumps pdf and 300-710 dumps VCE, leads4pass 300-710 exam questions updated and answers corrected!
Get the full Cisco 300-710 dumps from https://www.leads4pass.com/300-710.html (VCE&PDF)

Latest 300-710 PDF for free

Share the Cisco 300-710 Dumps PDF for free From leads4pass 300-710 Dumps part of the distraction collected on Google Drive shared by leads4pass
https://drive.google.com/file/d/1NavqeC0JxIXROLfGmJiOxO-jPtaizRsl/

Latest leads4pass 300-710 Youtube

Share the latest Cisco 300-710 exam practice questions and answers for free from Led4Pass Dumps viewed online by Youtube Videos

The latest updated Cisco 300-710 Exam Practice Questions and Answers Online Practice Test is free to share from leads4pass (Q1-Q13)

QUESTION 1
Which Firepower feature allows users to configure bridges in routed mode and enables devices to perform Layer 2
switching between interfaces?
A. FlexConfig
B. BDI
C. SGT
D. IRB
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/relnotes/Firepower_System_Release_Notes_Version_620/new_features_and_functionality.html

QUESTION 2
How many report templates does the Cisco Firepower Management Center support?
A. 20
B. 10
C. 5
D. unlimited
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guidev60/Working_with_Reports.html

QUESTION 3
After deploying a network-monitoring tool to manage and monitor networking devices in your organization, you realize
that you need to manually upload a MIB for the Cisco FMC. In which folder should you upload the MIB file?
A. /etc/sf/DCMIB.ALERT
B. /sf/etc/DCEALERT.MIB
C. /etc/sf/DCEALERT.MIB
D. system/etc/DCEALERT.MIB
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa-firepower
module-user-guide-v541/Intrusion-External-Responses.pdf

QUESTION 4
Which command is entered in the Cisco FMC CLI to generate a troubleshooting file?
A. show running-config
B. show tech-support chassis
C. system support diagnostic-cli
D. sudo sf_troubleshoot.pl
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technoteSourceFire-00.html

QUESTION 5
Which two actions can be used in an access control policy rule? (Choose two.)
A. Block with Reset
B. Monitor
C. Analyze
D. Discover
E. Block ALL
Correct Answer: AB
Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa-firepowermodule-user-guide-v541/AC-Rules-Tuning-Overview.html#71854

QUESTION 6
Which two features of Cisco AMP for Endpoints allow for an uploaded file to be blocked? (Choose two.)
A. application blocking
B. simple custom detection
C. file repository
D. exclusions
E. application whitelisting
Correct Answer: AB

QUESTION 7
Which report template field format is available in Cisco FMC?
A. box lever chart
B. arrow chart
C. bar chart
D. benchmark chart
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guidev60/Working_with_Reports.html

QUESTION 8
What is the result of specifying of QoS rule that has a rate limit that is greater than the maximum throughput of an
interface?
A. The rate-limiting rule is disabled.
B. Matching traffic does not rate limited.
C. The system rate-limits all traffic.
D. The system repeatedly generates warnings.
Correct Answer: B
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guidev62/quality_of_service_qos.pdf

QUESTION 9
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
A. BGPv6
B. ECMP with up to three equal-cost paths across multiple interfaces
C. ECMP with up to three equal-cost paths across a single interface
D. BGPv4 in transparent firewall mode
E. BGPv4 with nonstop forwarding
Correct Answer: AC
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config-guidev601/fpmc-config-guide-v60_chapter_01100011.html#ID-2101-0000000e

QUESTION 10
Which two types of objects are reusable and supported by Cisco FMC? (Choose two.)
A. dynamic key mapping objects that help link HTTP and HTTPS GET requests to Layer 7 application protocols.
B. reputation-based objects that represent Security Intelligence feeds and lists, application filters based on category and
reputation, and file lists
C. network-based objects that represent IP address and networks, port/protocols pairs, VLAN tags, security zones, and
origin/destination country
D. network-based objects that represent FQDN mappings and networks, port/protocol pairs, VXLAN tags, security
zones and origin/destination country
E. reputation-based objects, such as URL categories
Correct Answer: BC
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guidev62/reusable_objects.html#ID-2243-00000414

QUESTION 11
When do you need the file-size command option during troubleshooting with packet capture?
A. when capture packets are less than 16 MB
B. when capture packets are restricted from the secondary memory
C. when capture packets exceed 10 GB
D. when capture packets exceed 32 MB
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guidev62/troubleshooting_the_system.html

QUESTION 12
Which limitation applies to Cisco Firepower Management Center dashboards in a multidomain environment?
A. Child domains can view but not edit dashboards that originate from an ancestor domain.
B. Child domains have access to only a limited set of widgets from ancestor domains.
C. Only the administrator of the top ancestor domain can view dashboards.
D. Child domains cannot view dashboards that originate from an ancestor domain.
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guidev60/Using_Dashboards.html

QUESTION 13
Within Cisco Firepower Management Center, where does a user add or modify widgets?
A. dashboard
B. reporting
C. context explorer
D. summary tool
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guidev60/Using_Dashboards.html

Fulldumps shares the latest updated Cisco 300-710 exam exercise questions, 300-710 dumps pdf, and Youtube video learning for free.
All exam questions and answers come from the leads4pass exam dumps shared part! leads4pass updates throughout the year and shares a portion of your exam questions for free to help you understand the exam content and enhance your exam experience!
Get the full Cisco 300-710 exam dumps questions at https://www.leads4pass.com/300-710.html (pdf&vce)

ps.
Get free Cisco 300-710 dumps PDF online: https://drive.google.com/file/d/1NavqeC0JxIXROLfGmJiOxO-jPtaizRsl/