New Cisco CCNA Wireless 200-355 dumps pdf files and vce youtube demo update free shared. “Implementing Cisco Wireless Network Fundamentals” is the name of Cisco CCNA Wireless https://www.leads4pass.com/200-355.html exam dumps which covers all the knowledge points of the real Cisco exam. The best and most updated latest Cisco CCNA Wireless 200-355 dumps pdf training materials free try, pass Cisco 200-355 exam test easily.
Best useful Cisco 200-355 dumps pdf questions and answers: https://drive.google.com/open?id=0B_7qiYkH83VRM01sZjQ2dUtRckU
Best useful Cisco 300-115 dumps pdf questions and answers: https://drive.google.com/open?id=0B_7qiYkH83VROUdnZWRYLTJta1E
QUESTION 1
An AP using version 7.0 MR1 broadcasts a Layer 3 CAPWAP discovery message on the local IP subnet. Which step does the AP take next?
A. Determine if the controller responses include the primary controller.
B. Determine if the controller responses include the master controller.
C. Send a discovery request using DHCP option 43.
D. Send a discovery request using DNS.
E. Send a discovery request using locally stored information on the AP.
F. Send a discovery request using OTAP.
Correct Answer: E
QUESTION 2
You are designing a wireless network in a medical facility. Which three areas are bad locations in which to install a wireless access point? (Choose three.)
A. in front of the elevators doors
B. in the hallways
C. next to the electrical room
D. inside offices
E. near medical imaging devices
F. in the lobby
Correct Answer: ACE
QUESTION 3
Which two features are available in the Cisco WCS Plus license over the base license? (Choose two.)
A. ad hoc rogue detection
B. high availability between two Cisco WCS stations
C. mobility service engine management
D. auto discovery and containment or notification of rogue APs
E. client location to the nearest AP
Correct Answer: BC
QUESTION 4
When a client associates to ExamSSlD, which network address will be assigned? 200-355 dumps
A. The IP address assigned will be based on the AP network assignment of 10.10.10.0.
B. The IP address assigned will be based on the AP network assignment of 172.16.23.0.
C. The IP address will be assigned in a round-robin format based on the 172.16.12.0, 172.16.23.0,192.168.14.0 address pools.
D. The IP address will be assigned in a round-robin format based on the 172.16.12.0, 192.168.14.0,192.168.25.0 pools.
E. The IP address will be assigned in a round-robin format based on the 172.16.12.0, 172.16.23.0,192.168.14.0,192.168.25.0 pools.
Correct Answer: D
QUESTION 5
Which two services require an RToWLAN design? (Choose two.)
A. wVoIP
B. video conferencing
C. multicast video
D. Telnet
E. SSH
Correct Answer: AB
QUESTION 6
What suite of algorithms results in slower connection rates when using 802.11N technology?
A. WPA2
B. CCMP
C. TKIP
D. AES
Correct Answer: C
QUESTION 7
Refer to the exhibit. An engineer is configuring a SSID to utilize the management interface on the WLC. The management interface is configured with an untagged VLAN in the wireless controller interface settings. The controller is connected to a neighboring switch via the interface shown in the diagram.
Which VLAN will traffic coming from the newly created SSID use to traverse the wired network?
A. 1
B. 20
C. 44
D. 50
Correct Answer: C
QUESTION 8
How does an LWAP receive a configuration file? 200-355 dumps
A. It is configured manually.
B. It receives a configuration from the controller.
C. It automatically ships with a configuration.
D. It receives a configuration from a TFTP server.
Correct Answer: B
QUESTION 9
A help desk engineer is attempting to perform a remote packet capture on the wireless network. Which access point mode is necessary to perform this function?
A. sniffer
B. SE-Connect
C. monitor
D. rogue detector
E. FlexConnect
Correct Answer: A
QUESTION 10
A network engineer in the GUI of WCS version 7 wants to add an access point to a map. Where can this command be found within the drop-down menu?
A. Monitor andgt; Maps
B. Reports andgt; Maps
C. Monitor andgt; Network Summary
D. Configure andgt; Maps
Correct Answer: A
QUESTION 11
Which description best describes upfade in a multipath environment?
A. In this situation, multiple signal paths are not sent at exactly the same time. The receiver receives a positive crest on the primary signal and a negative crest on the secondary signal.
B. In this situation, the multiple signal paths are distorted and difficult to understand.
C. In this situation, the multiple signal paths are weaker than they should be because the signals are out of phase with each other.
D. In this situation, the signal is stronger than it should be because multiple signal paths are received twice at exactly the same time, which results in the multiple signals being in- phase.
Correct Answer: D
QUESTION 12
Which statement correctly describes the procedure for a lightweight AP to successfully establish a connection to a controller?
A. The AP authenticates the received Cisco WLC certificate as valid. The AP then sends its certificate to the controller.
B. The AP sends its certificate to the controller. The AP then authenticates the received Cisco WLC certificate as valid.
C. The AP sends its certificate to the RADIUS server. The AP then authenticates the controller certificate as valid.
D. The AP sends its certificate to the RADIUS server. The AP then authenticates the RADIUS certificate as valid.
E. The AP authenticates the received RADIUS server certificate as valid. The AP then sends its certificate to the RADIUS server.
F. The AP authenticates the received RADIUS server certificate as valid. The AP then sends its certificate to the controller.
Correct Answer: B
High quality Cisco CCNA Wireless https://www.leads4pass.com/200-355.html dumps pdf training resources which are the best for clearing 200-355 exam test, and to get certified by Cisco CCNA Wireless. 100% success and guarantee to pass.
Latest Cisco CCNA Wireless 200-355 dumps vce youtube: https://youtu.be/0TGsAsPt8uQ
