Helpful newest Cisco CCNP Data Center 300-175 dumps exam questions and answers free download from leads4pass. Latest Cisco CCNP Data Center 300-175 dumps pdf files and vce youtube demo update free shared. “DCUCI Implementing Cisco Data Center Unified Computing (DCUCI)” is the name of Cisco CCNP Data Center https://www.leads4pass.com/300-175.html exam dumps which covers all the knowledge points of the real Cisco exam. High quality Cisco CCNP Data Center 300-175 dumps pdf training materials and study guides free update, pass Cisco 300-175 exam test easily at first try.
Latest Cisco 300-175 dumps pdf questions and answers: https://drive.google.com/open?id=0B_7qiYkH83VRMjJsWXh1NTRUb28
Latest Cisco 300-165 dumps pdf questions and answers: https://drive.google.com/open?id=0B_7qiYkH83VRS1BVYmN4bjMtcU0
QUESTION 1
When a remote endpoint dials in to join a conference that is configured on a Cisco Telepresence Server bridge, the endpoint receives only audio. Other users can successfully join the call with Voice and Video. What is causing this issue?
A. The endpoint does not have the multisite option installed.
B. The endpoint does not have the partition of the bridge in its CSS.
C. The bridge is out of all licenses.
D. The endpoint is assigned a region without enough configured bandwidth for video.
E. The bridge is not able to host video calls.
Correct Answer: D
QUESTION 2
The link from your local Cisco Unity Connection site to another site has gone down. While troubleshooting, you discover that the local gateway is unable to reach a DNS server. Which action can you take to reestablish the link?
A. Restart the Connection Manager series on the local gateway
B. Create an intersite link manually using the IP address of the remote gateway.
C. Synchronize the two Cisco Unity Connection sites.
D. Create an intersite link manually using the FQDN of the remote gateway.
E. Configure the directory synchronization task schedule on the remote gateway.
Correct Answer: A
QUESTION 3
Users on your network report fast busy signals when they atlempt to place calls. While troubleshooting, you verify that the codecs are configured correctly and determine that the network carries up to 200 concurrent calls at different times of the day. Which two actions correct the problem? 300-175 dumps (Choose two).
A. Add more Cisco Unified Communications Managers to the cluster.
B. Add more DSPs to the NM-HD
C. Increase the number of sessions to the maximum allowed by system resources.
D. Implement an SRST-CMF gateway to improve resource allocation.
E. Add a Cisco Catalyst switch to the environment to increase port density
F. Bind the network PRIs to add additional bandwidth
Correct Answer: CF
QUESTION 4
Which debug command analyzes messages that are produced by SIP during the call setup process in IOS?
A. Show isdn status
B. debug voip ccapi inout
C. show sip-ua register status
D. debug isdn q931
E. debug ccsip messages
F. debug voice dialpeer
Correct Answer: E
QUESTION 5
Which two statements about software MTP devices are true? (Choose two.)
A. The RTMT can monitor the number of registered and in-use MTPs.
B. A single MTP can register with multiple Cisco Unified Communications Managers.
C. Each server can support up to four instances of the Cisco IP Voice Media Streaming Application.
D. The Cisco IP Voice Media Streaming Application can reduce the performance of the Cisco Unified Communications Manager if it is installed on the same server.
E. When you configure and restart the MTP, the changes are applied immediately to active calls.
F. When you configure and reset the MTP, the changes are applied immediately to active calls.
Correct Answer: AE
QUESTION 6
After you deploy a hardware transcoder, users without a common codec are unable to complete cafe to one another.
Which two actions must you take (Choose two.)
A. Use RTMT to verify mat transcoder resources are available
B. verify that all SIP trunks are registered within Cisco Unified Communications Manager
C. verify that media resources are assigned to the transcoder
D. verify that the transcoder registered with Cisco Untied Communications Manage.
E. verify that the transcoder is running the latest firmware and flash NVRAM
Correct Answer: A
QUESTION 7
When you troubleshoot call connection problems in an H.323 gateway, which command allows you to verify the allocation of DSPs?
A. debug voip dialpeer
B. debug voip h324
C. debug voip ccapi inout
D. debug vtsp session
E. debug voip tsp
Correct Answer: D
QUESTION 8
You must integrate a third-party H.323 system with your existing Cisco Unified Communications Manager cluster. When you create an H.323 trunk from the cluster, calls from the cluster to the third-party H.323 system are failing. The vendor of the third-party H.323 device has confirmed that the H.323 call setup time must be reduced. 300-175 dumps Which two approaches reduce the call setup time from Cisco Unified Communications Manager to the third-party H.323 device? (Choose two.)
A. Implement a software MTP.
B. Implement a hardware MTP.
C. Implement transcoding with the router DSP resources.
D. Implement transcoding with the Cisco Unified Communications Manager resources.
Correct Answer: AB
QUESTION 9
Which configuration is required on Cisco TelePresence Server, in order to support 1080p resolution?
A. Screen licenses must be configured.
B. Cisco TelePresence Server must be in remotely managed mode.
C. Cisco TelePresence Server must be in HD mode.
D. Cisco TelePresence Server must be configured with Cisco TelePresence Conductor.
E. Cisco TelePresence Server must be in Full HD mode.
Correct Answer: E
QUESTION 10
While you deploy SAF CCD in a remote location, you are unable to enable the SAF CCD service on an Cisco IOSbased device. Which action can you take to troubleshoot the problem?
A. Verify that Cisco Unity Express is operational.
B. Verify that IOS Release 15.0(1)M is installed.
C. Verify that DSP Farm resources are configured on the device.
D. Verify that the device has sufficient RAM to run SAF CCD.
E. Verify the integrity of the flash installation.
Correct Answer: A
QUESTION 11
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)
A. RTMT trace output
B. Cisco IOS debug commands
C. Dialed Number Analyzer output
D. Cisco Unified Communications Manager alerts
E. Cisco IOS show commands
Correct Answer: BE
QUESTION 12
When users in headquarters call branch office users over the WAN link, branch users report poor audio quality.
Headquarters users consistently experience acceptable audio quality. Which troubleshooting approach most directly improves the audio quality of the branch users?
A. Make the branch router configuration for LLQ match the headquarters router.
B. Make the headquarters router configuration for LLQ match the branch router.
C. Make the branch router configuration for CBWFQ match the headquarters router.
D. Make the headquarters router configuration for CBWFQ match the branch router.
Correct Answer: B
QUESTION 13
What is the default interval for SAF hello packets?
A. 15seconds
B. 15 seconds on links with speeds that are slower than T1 speeds
C. 40seconds
D. 40 seconds on links with speeds that are slower than T1 speeds
E. 60seconds
F. 60 seconds on links with speeds that are slower than T1 speeds
Correct Answer: F
QUESTION 14
A user is trying to call a mobile phone using the number 547895341, where 5 is the prefix to can off-net numbers. 300-175 dumps Calls to mobile phones have worked in past, but now the call does not work. Which three areas should you check, to resolve the issue? (Choose three)
A. Verify that the Cisco Unified Border Element is running.
B. Verify the search pattern.
C. Verity the route pattern, route list, and route group.
D. Check that Cisco VCS Control and Cisco VCS Express are getting through the firewall.
E. Verify that me PSTN line is connected to the cisco Unified Communications Manager.
F. Verify that the connection to and from the Cisco Unified Border Element is good.
Correct Answer: ACE
QUESTION 15
During a business-to-business video call through the Cisco Expressway solution, the internal endpoint can call out to the remote endpoint on the Internet, but it does not receive audio or video. The remote endpoint receives both audio and video. What is causing the issue?
A. The Cisco Expressway does not have a Rich Media Session license.
B. The firewall is blocking SIP signaling.
C. The Cisco Unified Communications Manager is not configured for business-to-business calling.
D. The firewall is blocking inbound RTP ports.
E. The Advanced Networking option is not installed on the Expressway Edge.
Correct Answer: D
The best and most updated Cisco CCNP Data Center 300-175 dumps exam practice materials in PDF format free download from leads4pass. Useful latest Cisco CCNP Data Center https://www.leads4pass.com/300-175.html dumps pdf training resources which are the best for clearing 300-175 exam test, and to get certified by Cisco CCNP Data Center, download one of the many PDF readers that are available for free.
High quality Cisco CCNP Data Center 300-175 dumps vce youtube: https://youtu.be/eY_9wwsP8no