High quality Cisco CCNA 200-125 dumps exam real questions and answers free download from lead4pass. With the help of latest and authentic exam questions, you can find the best 200-125 dumps exam preparation kit here from lead4pass and you will also get the 100% guarantee for passing the Cisco exam. “CCNA Cisco Certified Network Associate CCNA (v3.0)” is the name of Cisco CCNA https://www.leads4pass.com/200-125.html exam dumps which covers all the knowledge points of the real Cisco exam. I am 100% you will clear this 200-125 by downloading exam dumps. It is the best choice for you to pass Cisco 200-125 exam test quickly and easily.
Practice for your Cisco 200-125 exam with the help of lead4pass, at lead4pass you can find all the necessary things for yourself that will help you to pass Cisco CCNA 200-125 exam. You can download Cisco CCNA 200-125 dumps pdf training material from lead4pass and pass the Cisco 200-125 exam in the first attempt. Cisco CCNA 200-125 exam preparation kit contains all the necessary 200-125 questions that you need to know.
Vendor: Cisco
Certifications: CCNA
Exam Name: CCNA Cisco Certified Network Associate CCNA (v3.0)
Exam Code: 200-125
Total Questions: 872 Q&As
Best Cisco CCNA 200-125 Dumps Exam Real Questions And Answers (21-50)
QUESTION 21
Refer to the exhibit.
Which of these statements correctly describes the state of the switch once the boot process has been completed?
A. As FastEthernet0/12 will be the last to come up, it will be blocked by STP.
B. Remote access management of this switch will not be possible without configuration change.
C. More VLANs will need to be created for this switch.
D. The switch will need a different IOS code in order to support VLANs and STP.
Correct Answer: B
QUESTION 22
Which set of commands is recommended to prevent the use of a hub in the access layer?
A. switch(config-if)#switchport mode trunk switch(config-if)#switchport port-security maximum 1
B. switch(config-if)#switchport mode trunk switch(config-if)#switchport port-security mac-address 1
C. switch(config-if)#switchport mode access switch(config-if)#switchport port-security maximum 1
D. switch(config-if)#switchport mode access switch(config-if)#switchport port-security mac-address 1
Correct Answer: C
QUESTION 23
If IP routing is enabled, which two commands set the gateway of last resort to the default gateway? (Choose two.)
A. ip default-gateway 0.0.0.0
B. ip route 172.16.2.1 0.0.0.0 0.0.0.0
C. ip default-network 0.0.0.0
D. ip default-route 0.0.0.0 0.0.0.0 172.16.2.1
E. ip route 0.0.0.0 0.0.0.0 172.16.2.1
Correct Answer: CE
QUESTION 24
What is the effect of using the service password-encryption command?
A. Only the enable password will be encrypted.
B. It will encrypt all current and future passwords.
C. It will encrypt the secret password and remove the enable secret password from the configuration.
D. Only the enable secret password will be encrypted.
E. Only passwords configured after the command has been entered will be encrypted.
Correct Answer: B
QUESTION 25
Which two statements about IPv4 multicast traffic are true? (Choose two.)
A. It burdens the source host without affecting remote hosts.
B. It uses a minimum amount of network bandwidth.
C. It is bandwidth-intensive.
D. It simultaneously delivers multiple streams of data.
E. It is the most efficient way to deliver data to multiple receivers.
Correct Answer: DE
QUESTION 26
Refer to the exhibit.
The speed of all serial links is E1 and the speed of all Ethernet links is 100 Mb/s. A static route will be established on the Manchester router to direct traffic toward the Internet over the most direct path available. 200-125 dumps What configuration on the Manchester router will establish a route toward the Internet for traffic that originates from workstations on the Manchester LAN?
A. ip route 0.0.0.0 255.255.255.0 172.16.100.2
B. ip route 0.0.0.0 0.0.0.0 128.107.1.1
C. ip route 0.0.0.0 255.255.255.252 128.107.1.1
D. ip route 0.0.0.0 0.0.0.0 172.16.100.1
E. ip route 0.0.0.0 0.0.0.0 172.16.100.2
F. ip route 0.0.0.0 255.255.255.255 172.16.100.2
Correct Answer: E
QUESTION 27
When a router undergoes the exchange protocol within OSPF, in what order does it pass through each state?
A. exstart state andgt; loading state andgt; exchange state andgt; full state
B. exstart state andgt; exchange state andgt; loading state andgt; full state
C. exstart state andgt; full state andgt; loading state andgt; exchange state
D. loading state andgt; exchange state andgt; full state andgt; exstart state
Correct Answer: B
QUESTION 28
What are two benefits of private IPv4 IP addresses? (Choose two.)
A. They are routed the same as public IP addresses.
B. They are less costly than public IP addresses.
C. They can be assigned to devices without Internet connections.
D. They eliminate the necessity for NAT policies.
E. They eliminate duplicate IP conflicts.
Correct Answer: BC
QUESTION 29
Which statement about slow inter VLAN forwarding is true?
A. The VLAN is experiencing slowness in the point-to-point collisionless connection.
B. The VLANs are experiencing slowness because multiple devices are connected to the same hub.
C. The local VLAN is working normally, but traffic to the alternate VLAN is forwarded slower than expected.
D. The entire VLAN is experiencing slowness.
E. The VLANs are experiencing slowness due to a duplex mismatch.
Correct Answer: E
QUESTION 30
which two steps must you perform to enbale router-on-stick on a switch ?(choose two)
A. connect the router to a trunk port
B. config the subint number exactly the same as the matching VLAN
C. config full duplex
D. cofigure an ip route to the vlan destn net
E. assign the access port to the vlan
Correct Answer: AB
QUESTION 31
Which two tasks does the Dynamic Host Configuration Protocol perform? (Choose two.)
A. Set the IP gateway to be used by the network.
B. Perform host discovery used DHCPDISCOVER message.
C. Configure IP address parameters from DHCP server to a host.
D. Provide an easy management of layer 3 devices.
E. Monitor IP performance using the DHCP server.
F. Assign and renew IP address from the default pool.
Correct Answer: CF
QUESTION 32
Scenario:
Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links. 200-125 dumps
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices.
An OSPF neighbor adjacency is not formed between R3 in the main office and R4 in the Branch1 office. What is causing the problem?
A. There is an area ID mismatch.
B. There is a Layer 2 issue; an encapsulation mismatch on serial links.
C. There is an OSPF hello and dead interval mismatch.
D. The R3 router ID is configured on R4.
Correct Answer: A
QUESTION 33
which three technical services support cloud computing ?
A. network-monitored power sources
B. layer 3 network routing
C. ip localization
D. redundant connections
E. VPN connectivity
F. extended SAN services
Correct Answer: CDF
QUESTION 34
Which component of the routing table ranks routing protocols according to their preferences?
A. administrative distance
B. next hop
C. metric
D. routing protocol code
Correct Answer: A
QUESTION 35
Which command can you execute to set the user inactivity timer to 10 seconds?
A. SW1(config-line)#exec-timeout 0 10
B. SW1(config-line)#exec-timeout 10
C. SW1(config-line)#absolute-timeout 0 10
D. SW1(config-line)#absolute-timeout 10
Correct Answer: A
QUESTION 36
Which value is used to determine the active router in an HSRP default configuration?
A. Router loopback address
B. Router IP address
C. Router priority
D. Router tracking number
Correct Answer: C
QUESTION 37
In which two formats can the IPv6 address fd15:0db8:0000:0000:0700:0003:400F:572B be written? 200-125 dumps (Choose two.)
A. fd15:0db8:0000:0000:700:3:400F:527B
B. fd15::db8::700:3:400F:527B
C. fd15:db8:0::700:3:4F:527B
D. fd15:0db8::7:3:4F:527B
E. fd15:db8::700:3:400F:572B
Correct Answer: AE
QUESTION 38
Which command can you enter to route all traffic that is destined for 192.168.0.0/20 to a specific interface?
A. router(config)#ip route 192.168.0.0 255.255.240.0 GigabitEthernet0/1
B. router(config)#ip route 0.0.0.0 255.255.255.0 GigabitEthernet0/1
C. router(config)#ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/1
D. router(config)#ip route 192.168.0.0 255.255.255.0 GigabitEthernet0/1
Correct Answer: A
QUESTION 39
Which statement about QoS default behavior is true?
A. Ports are untrusted by default.
B. VoIP traffic is passed without being tagged.
C. Video traffic is passed with a well-known DSCP value of 46.
D. Packets are classified internally with an environment.
E. Packets that arrive with a tag are untagged at the edge of an administrative domain.
Correct Answer: E
QUESTION 40
A security administrator wants to profile endpoints and gain visibility into attempted authentications. Which 802.1x mode allows these actions?
A. Monitor mode
B. High-Security mode
C. Low-impact mode
D. Closed mode
Correct Answer: A
QUESTION 41
Which range represents the standard access list?
A. 99
B. 150
C. 299
D. 2000
Correct Answer: A
QUESTION 42
If the primary root bridge experiences a power loss, which switch takes over?
A. switch 0004.9A1A.C182
B. switch 00E0.F90B.6BE3
C. switch 00E0.F726.3DC6
D. switch 0040.0BC0.90C5
Correct Answer: A
QUESTION 43
Refer to the exhibit.
What is the reason that the interface status is andquot;administratively down, line protocol downandquot;?
A. There is no encapsulation type configured.
B. There is a mismatch in encapsulation types.
C. The interface is not receiving any keepalives.
D. The interface has been configured with the shutdown command.
E. The interface needs to be configured as a DTE device.
F. The wrong type of cable is connected to the interface.
Correct Answer: D
QUESTION 44
Which statement about named ACLs is true?
A. They support standard and extended ACLs.
B. They are used to filter usernames and passwords for Telnet and SSH.
C. They are used to filter Layer 7 traffic.
D. They support standard ACLs only.
E. They are used to rate limit traffic destined to targeted networks.
Correct Answer: A
QUESTION 45
Refer to the exhibit.
Each of these four switches has been configured with a hostname, as well as being configured to run RSTP. No other configuration changes have been made. Which three of these show the correct RSTP port roles for the indicated switches and interfaces? (Choose three.)
A. SwitchA, Fa0/2, designated
B. SwitchA, Fa0/1, root
C. SwitchB, Gi0/2, root
D. SwitchB, Gi0/1, designated
E. SwitchC, Fa0/2, root
F. SwitchD, Gi0/2, root
Correct Answer: ABF
QUESTION 46
Which three of these statements regarding 802.1Q trunking are correct? (Choose three.)
A. 802.1Q native VLAN frames are untagged by default.
B. 802.1Q trunking ports can also be secure ports.
C. 802.1Q trunks can use 10 Mb/s Ethernet interfaces.
D. 802.1Q trunks require full-duplex, point-to-point connectivity.
E. 802.1Q trunks should have native VLANs that are the same at both ends.
Correct Answer: ACE
QUESTION 47
Which three are valid modes for a switch port used as a VLAN trunk? (Choose three.)
A. transparent
B. auto
C. on
D. desirable
E. blocking
F. forwarding
Correct Answer: BCD
QUESTION 48
Which feature is config by setting a variance that is at least 2 times the metric?
A. unequal cost load balancing
B. path selection
C. equal cost load balancing
D. path count
Correct Answer: A
QUESTION 49
Which three encapsulation layers in the OSI model are combined into the TCP/IP application layer? 200-125 dumps (Choose three)
A. Session
B. transport
C. presentation
D. application
E. data-link
F. network
Correct Answer: ACD
QUESTION 50
When a router is unable to find a known route in the routing table,how dose it handle the pacet?
A. It sends the packet to the next hop address
B. It sends the packet to the gateway of last resort
C. It discards the packet
D. It sends the packet over the route with the best metric
Correct Answer: B
What Our Customers Are Saying:
Download free Latest Cisco 200-125 dumps pdf training materials from google drive: https://drive.google.com/open?id=0B_7qiYkH83VRSnZDMkVUWDJzLWM
Download free Latest Cisco 210-260 dumps pdf training materials from google drive: https://drive.google.com/open?id=0B_7qiYkH83VRcnI0SE83bHBvQ1k
Why Select Lead4pass?
Lead4pass is the best site for providing online preparation material for 200-125 exam. Get your Cisco CCNA 200-125 exam preparation questions in form of 200-125 PDF. Other brands started earlier, but the price is relatively expensive and the questions are outdated. Lead4pass provide the latest real questions and answers with cheapest prices, help you pass the exam easily at first try.
The best and most updated latest Cisco CCNA 200-125 dumps exam practice files in PDF format free download from lead4pass. Cisco CCNA https://www.leads4pass.com/200-125.html dumps pdf training resources which are the best for clearing 200-125 exam test, and to get certified by Cisco CCNA, download one of the many PDF readers that are available for free. 100% success and guarantee to pass Cisco 200-125 exam.
Useful Cisco CCNA 200-125 dumps vce youtube: https://youtu.be/nF4Ul2viODM
