The latest Cisco 300-515 dumps by Lead4Pass helps you pass the 300-515 exam for the first time! Lead4Pass Latest Update Cisco 300-515 VCE Dump and 300-515 PDF Dumps, Lead4Pass 300-515 Exam Questions Updated, Answers corrected! Get the latest LeadPass 300-515 dumps with Vce and PDF: https://www.leads4pass.com/300-515.html (Q&As: 59 dumps)
[Free 300-515 PDF] Cisco 300-515 Dumps PDF can be collected on Google Drive shared by Lead4Pass:
https://drive.google.com/file/d/1mANa3AL4Cz9sNFMUSxiZXVbtukrD6zHw/
[Lead4pass 300-515 Youtube] Cisco 300-515 Dumps can be viewed on Youtube shared by Lead4Pass
Cisco 300-515 Online Exam Practice Questions
QUESTION 1
Which two statements about MPLS L3 VPN RDs are true? (Choose two.)
A. They enable EIGRP to use address families to separate traffic between IPv4 and VPNv4.
B. They are represented as 32-bit values
C. They are represented as 64-bit values.
D. They enable OSPF to import and export routes into the global routing table of a router.
E. They allow BGP to uniquely identify duplicate routes.
Correct Answer: CE
QUESTION 2
DRAG DROP
Refer to the exhibit. Drag and drop the EVC configuration items from the left onto the correct descriptions on the right.
Select and Place:
Correct Answer:
QUESTION 3
In a typical service provider environment, which two tools are used to help scale PE router connectivity requirements?
(Choose two.)
A. route reflectors
B. VPNv4 address family
C. originator ID
D. cluster ID
E. confederations
Correct Answer: AE
QUESTION 4
While troubleshooting an AToM L2VPN service, a network consultant notices that the AC Layer 2 encapsulations are
different. Which action should the consultant take in order to make the MPLS L2VPN work?
A. tag-rewrite on the ingress and egress PE router
B. interworking IP configuration on the last PE router before label disposition
C. nonrouted interworking setup to properly translate only the Layer 2 information from the AC
D. interworking IP configuration on both the AC terminations on the PEs
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_l2_vpns/configuration/xe-16-11/mp-l2-vpnsxe-16-11-book/l2vpn-interworking.html
QUESTION 5
Refer to the exhibit. PE1 and PE2 are exchanging VPNv4 routes for CE1 and CE2, and PE3 contains the default route
to the internet. If the three devices are operating normally, which two conclusions describe this configuration? (Choose
two.)
A. The CE1 and CE2 VRFs can exchange routes only between their respective VRFs on PE1 and PE2.
B. All three routers must be running a distance-vector routing protocol.
C. All three routers must be running MP-BGP.
D. The CE1 and CE2 VRFs can access the default route provided by the Internet VRF.
E. Only the CE2 VRF can access the default route provided by the Internet VRF.
Correct Answer: AC
QUESTION 6
The CTO of a company requires the support of a network consultant to deliver an MPLS solution without resigning to a
certain degree of redundancy and scalability. Which solution effectively scales to hundreds or thousands of sites?
A. L2VPN with the broadcast traffic processed at the ingress PE.
B. L3VPN with direct LSP connectivity between all PEs.
C. L2VPN by encapsulating multiple frame formats with interworking.
D. L3VPN using a hierarchical topology of N-PEs and U-PEs.
Correct Answer: D
QUESTION 7
Refer to the exhibit. Which statement about this configuration is true?
A. Router 1 will accept multicast routes with a route-target of 12:1.
B. 192.168.1.2 must be reachable by all routers participating in the mvpn-intranet MVRF.
C. Router 1 has statically defined thresholds for data MDT.
D. The MVRF must be configured on each router on the customer and service provider networks.
Correct Answer: A
QUESTION 8
Which two statements describe the primary differences between MPLS Layer 2 and Layer 3 VPNs? (Choose two.)
A. Layer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use L2TPv3 tunneling.
B. Layer 2 VPNs use AToM, but Layer 3 VPNs use MPLS/BGP.
C. Layer 2 VPNs use BGP, but Layer 3 VPNs use VPLS.
D. Layer 2 VPNs use L2TPv3 tunneling, but Layer 3 VPNs use GRE tunneling.
E. Layer 2 VPNs use IPsec tunneling, but Layer 3 VPNs use pseudowires to provide tunneling.
Correct Answer: BD
QUESTION 9
Refer to the exhibit. If the two devices are operating normally, which two conclusions can you draw from this
configuration? (Choose two.)
A. CE1 must use OSPF to establish a neighbor relationship with PE1.
B. PE1 labels the routes it learns from CE1 with the route-target 222:2 and shares them with its VPNv4 peers.
C. PE1 labels the routes it learns from CE1 with the route-target 111:1 and shares them with its VPNv4 peers.
D. The PE-CE routes between the devices are being exchanged by OSPF
E. CE1 is supporting CSC.
Correct Answer: AD
QUESTION 10
Refer to the exhibit. A customer carrier running MPLS VPN wants to utilize a backbone carrier to forward traffic and
exchange VPNv4 prefixes between the two customer carrier networks depicted. Which two sets of routers must
establish MPiBGP sessions? (Choose two.)
A. BB-PE-A and CC-PE-B
B. CC-PE-A and CC-PE-B
C. BB-PE-A and BB-PE-B
D. CC-PE-A and BB-PE-A
E. BB-PE-A and BB-P-A
F. CC-PE-A and CC-P-A
Correct Answer: BC
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_ias_and_csc/configuration/12-2sx/mp-ias-andcsc-12-2sx-book/mp-carrier-bgp.html
QUESTION 11
You try to configure MPLS VPN VRF Selection based on a source IP address on an interface that has VRF configured,
but you receive an error. Which action must you take to correct the problem?
A. Change the source IP address.
B. Add the IP address to the VRF table.
C. Remove the VRF from the interface.
D. Configure static routes for the VRF.
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/vrfselec.html
QUESTION 12
Refer to the exhibit. What is the effect of this configuration?
A. The mroute table is cleared.
B. Router 1 accepts multicast routes with a tag of 12:1
C. A Cisco MPLS TE tunnel is generated with 192.168.1.2 as the source IP address of router 1.
D. An LSP virtual interface tunnel is created.
Correct Answer: B
QUESTION 13
Which optional information can be included with an IPv6 ping to support the troubleshooting process?
A. IPv4 IP address
B. source MAC address
C. destination MAC address
D. IPv6 hostname
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/configuration/xe-3s/ipv6-xe-36s-book/ip6-mngapps.html
latest updated Cisco 300-515 exam questions from the Lead4Pass 300-515 dumps! 100% pass the 300-515 exam! Download Lead4Pass 300-515 VCE and PDF dumps: https://www.leads4pass.com/300-515.html (Q&As: 59 dumps)
Get free Cisco 300-515 dumps PDF online: https://drive.google.com/file/d/1mANa3AL4Cz9sNFMUSxiZXVbtukrD6zHw/
