The latest Cisco 300-535 dumps by Lead4Pass helps you pass the 300-535 exam for the first time! Lead4Pass Latest Update Cisco 300-535 VCE Dump and 300-535 PDF Dumps, Lead4Pass 300-535 Exam Questions Updated, Answers corrected! Get the latest LeadPass 300-535 dumps with Vce and PDF: https://www.leads4pass.com/300-535.html (Q&As: 60 dumps)
[Free 300-535 PDF] Cisco 300-535 Dumps PDF can be collected on Google Drive shared by Lead4Pass:
https://drive.google.com/file/d/1UwdDU0xyQP2iV8w-PxrcC-YJ8leE1l9_/
[Lead4pass 300-535 Youtube] Cisco 300-535 Dumps can be viewed on Youtube shared by Lead4Pass
Cisco 300-535 Online Exam Practice Questions
QUESTION 1
Refer to the exhibit. What is the effect of the script on the device?
A. All interfaces except GigabitEthernet2 are reset to their default configurations.
B. It replaces the entire configuration for GigabitEthernet2 on the device using RESTCONF.
C. It merges the new configuration with the existing configuration on the device using RESTCONF.
D. It compares the configuration to the device. If it matches, the device sends back an HTTP 204 status code.
Correct Answer: C
QUESTION 2
Which two data formats are human readable? (Choose two.)
A. YAML
B. Apache Arrow
C. gRPC
D. binary
E. JSON
Correct Answer: AE
QUESTION 3
Which schema allows device configuration elements to be enclosed within a remote procedure call message when
NETCONF is implemented?
A. JSON-RPC
B. XML
C. YAML
D. JSON
Correct Answer: B
Reference: https://books.google.com/books?id=jWVsAQAAQBAJandpg=PA21andlpg=PA21anddq=schema+allows+dev
ice+configuration+elements+to+be+enclosed+within+a+remote+procedure+call+message+when+NETCONF+is +imple
mentedandsource=blandots=mcS25iO8ecandsig=ACfU3U08SQUN0Y7L2-An37GjHRqBzLGFUAandhl=enandsa=Xand
ved=2ahUKEwir16OF4dbpAhV7GjQIHc64B5kQ6AEwAHoECAoQAQ#v=onepageandq=schema%20allows%20device%
20configuration%20elements%20to%20be%20enclosed%20within%20a%20remote%20procedure%20call%20message
%20when%20NETCONF%20is%20implementedandf=false
QUESTION 4
When using Cisco YDK, which syntax configures the BGP ASN using OpenConfig BGP?
A. bgp.config.as_ = 65000
B. bgp.global_.config.as = 65000
C. bgp.global.config.as_ = 65000
D. bgp.global_.config.as_ = 65000
Correct Answer: D
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKNMS-2032.pdf
QUESTION 5
The Netmiko BaseConnection class contains a method called “send_config_set()”. Which two actions does this method
perform on the device? (Choose two.)
A. It takes a filename parameter that executes commands contained in that file on the device.
B. It requires the user to explicitly send configure terminal and exit commands to the device to enter and exit
configuration mode.
C. It automatically enters and exits the configuration mode on the device.
D. It takes a Python iterable, such as a list of commands, and executes them in order on the device.
E. It saves the running configuration to the startup configuration after executing the configuration commands on the
device.
Correct Answer: CD
QUESTION 6
Which two commands generate a template using Cisco NSO to build a service package? (Choose two.)
A. show running-config devices device ce-ios config ios: interface Loopback 0 | display template.xml
B. show running-config devices device ce-ios config ios: interface Loopback 0 | display XML | save template.xml
C. request running-config devices device ce-ios config ios:interface Loopback 0 | display XML
D. show running-config devices device ce-ios config ios: interface Loopback 0
E. show running-config devices device ce-ios config ios: interface Loopback 0 | display XML
Correct Answer: AC
QUESTION 7
Refer to the exhibit. The ncclient Python script is captured from the ncclient import manager. Which configuration on the
Cisco IOS XE device is the script used to enable?
A. router OSPF 100 router-id 1.1.1.1 network 10.1.1.0 0.0.0.3 area 0
B. router OSPF 100 network 10.1.1.0 0.0.0.3 area 0
C. router OSPF 100 router-id 10.1.1.0 network 1.1.1.1 0.0.0.3 area 0
D. router OSPF 100 router-id 1.1.1.1
Correct Answer: A
QUESTION 8
DRAG DROP
Drag and drop the components of Cisco Network Services Orchestrator from the left onto the correct definitions on the
right.
Select and Place:
QUESTION 9
An engineer must change from using NETCONF for streaming telemetry to telemetry data using the gRPC framework
because NETCONF uses XML for the message and payload encoding. Which two messages and payload encodings does
gNMI use? (Choose two.)
A. gNMI notifications with XML
B. protobuf notifications with XML
C. protobuf payload
D. JSON payload
E. gNMI notifications with JSON
Correct Answer: CE
Reference: https://books.google.com/books?id=4AqXDwAAQBAJandpg=PT131andlpg=PT131anddq=messages+and+p
ayload+encodings+does+gNMI +useandsource=blandots=81hpFjIZ_9andsig=ACfU3U1EAEwjRMBnCiHNESBwFLHvZ
DHkBwandhl=enandsa=Xandved=2ahUKEwjirNeZptfpAhXDoFsKHeqMBFsQ6AEwBHoECAsQAQ#v=onepageandq=m
essages%20and%20payload%20encodings% 20does%20gNMI%20useandf=false
QUESTION 10
What are two benefits of using Cisco NSO? (Choose two.)
A. It abstracts the device adapter and complex device logic from the service logic.
B. It uses load balancing services for better traffic distribution.
C. It easily integrates into northbound systems and APIs.
D. It can replace the CI/CD pipeline tools.
E. It automatically discovers all deployed services.
Correct Answer: AC
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKDCN-2498.pdf
QUESTION 11
You create a simple service package skeleton in Cisco NSO using ncs-make-package? ervice-skeleton template VLAN.
Which two steps must be performed to complete the service? (Choose two.)
A. Create the VLAN service template in XML.
B. Modify the VLAN FastMap algorithm.
C. Start the VLAN Python VM.
D. Create the VLAN service model in YANG.
E. Compile the VLAN NED.
Correct Answer: DE
QUESTION 12
An engineer is deploying a Python script to manage network devices through SSH. Which library based on Paramiko is
used?
A. sshmiko
B. paramiko.agent
C. libssh2
D. netmiko
Correct Answer: D
Reference: https://pynet.twb-tech.com/blog/automation/netmiko.html
QUESTION 13
Refer to the exhibit. Using the provided XML snippet, which Xpath expression prints “Jane”?
A. //employee[1]/firstName/value()
B. //employee[0]/firstName/value()
C. //employee[1]/firstName/text()
D. //employee[0]/firstName/text()
Correct Answer: D
latest updated Cisco 300-535 exam questions from the Lead4Pass 300-535 dumps! 100% pass the 300-535 exam! Download Lead4Pass 300-535 VCE and PDF dumps: https://www.leads4pass.com/300-535.html (Q&As: 60 dumps)
Get free Cisco 300-535 dumps PDF online: https://drive.google.com/file/d/1UwdDU0xyQP2iV8w-PxrcC-YJ8leE1l9_/
